Smokehouse Parts

Diamant Smoke Sticks - Stainless Steel Walton's Smoke sticks to fit most commercial smokehouses. Available in 34 in or 42 in lengths in both large and slim designs capable of handling up to 160 lb load capacity. Extremely high quality smoke sticks that...

These smokesticks are made from aluminum and are 42" long, however, they can be cut down to shorter dimensions by the customer if need be. They are 1/8" walled and have the 3-sdied design to make hanging easier and more secure.

1/2in x 1in SMOKEHOUSE GASKET Red/Orange silicone closed cell sponge  Maximum temperature 400° Sold by the foot

Stainless Steel 25" x 35"

Poly Jerky Sheet - Fine FDA-compliant and non-stick netting made from a polypropylene mesh. Designed for use in laying on smokehouse racks to make an easy surface to place jerky on during thermal processing. The non-stick netting has small enough holes...

1in X 2in SMOKEHOUSE GASKET Red/Orange silicone closed cell sponge  Maximum temperature 400° Sold by the foot

RTV PRIME COAT FOR GASKETS 10.9 oz. can Clear Use before applying silicone heat resistant sealant  

Tel-Tru Check Set Calibrator The Check-Set series is the perfect temperature reference device for plant quality assurance, process control, food safety, instrument calibration and service, and HACCP compliance (Hazard Analysis Critical Control Points)...

Heat Resistant300 ml Cartridge Tube   NOTE: May need 6 oz. Prime Coat

Model 150/300 Heating Element

PK 100 Heating Element Pro Smoker A simple replacement part for your PK 100. A 1250 watt heating element that can replace the original heating element on the PK 100 if yours is having issues or needs replaced. Features: 1250 watt 120 volt

PK 100 Burner Drip Pan Pro Smoker A replacement burner drip pan part for your PK 100 (also fits the 100SS, 150SS, and 300SS Pro Smoker Smokehouses). Typically you will want to replace this part when you are also replacing the heating element...

PK 100 Burner Support Ring Pro Smoker A simple replacement part for your PK 100 (also fits the 100SS, 150SS, and 300SS Pro Smoker Smokehouses). Typically you will want to replace this part when you are also replacing the heating element. Features: Fits...

PK 100 Sawdust Pan Pro Smoker Buy an extra sawdust pan, or replace an old one from your PK 100 Smokehouse. Extremely heavy-duty and 100% stainless steel. Specifically made to be used for sawdust and placing on the heating element inside of the PK 100...

High-Temp Wheel for Smokehouse Truck 4" x 2"  High-Temp Reinforced Thermoplastic Wheel  3/4" Roller Bearing

Poly Jerky Sheet - Coarse Non stick netting. Makes for easy release of product off of smoke screens. Also reduces waste loss and cleaning time. Made from an FDA-compliant polyethylene resin with 1/2 in square hole openings and 0.095 in thickness. Each...

Smokehouse Wet Socks 4" x 5"